In order to make your projector lamp reach the maximum length in life span there are few tips that you should know as a user.

In order to correctly manipulate the projector lamp you need a piece of textile cloth or a pair of textile gloves. The lamp must never be touched with the fingers so it is always wise to manipulate the lamps components using a pair of textile gloves. The prints that remain on the glass of the lamp can cause the rising of the temperature in those areas and on the long term can significantly reduce the duration of the lamps functioning.

Another preventive measure is clearing the projectors filters. The dirty filters are blocking the air flow and cause the overheating of the lamp reducing the functioning period. In case of a replacement using the warranty certificate, the producer will test the lamp to see if the damage has occurred due to the overheating from filter clogging. If the test proves that that was the case the warranty is annulled. That is why it is very important to let the airflow around the projector as free as possible.

If you wish to introduce a new bulb in the existing lighting module of the lamp, make sure that the terminals are very tightly closed because the ceramic block can crack and that may cause ruptures that are reducing considerably the electronic isolation of the lamp.

On the other hand if the terminals are loose the risk of an electric arc to be produced is very high and this will cause the malfunction of the lamps source of power or even of the lamp itself.

Always use the remote control when stopping the projector. If you unplug the device without stopping it first the projector will invariably enter the cooling mode when the image is stopped and the fan will accelerate the cooling of the lamp in a controlled mode. The temperature of the lamp during operating mode is 1,000 C. Unplugging the lamp without letting it first passing through the off mode will cause the unequal cooling of the lamps glass which can cause the cracking of the glass and the premature malfunction of the lamp.

Compare Prices on Replacement Projector Lamps and Projector Bulbs

by Jong Hun

In order to make your projector lamp reach the maximum length in life span there are few tips that you should know as a user.

In order to correctly manipulate the projector lamp you need a piece of textile cloth or a pair of textile gloves. The lamp must never be touched with the fingers so it is always wise to manipulate the lamps components using a pair of textile gloves. The prints that remain on the glass of the lamp can cause the rising of the temperature in those areas and on the long term can significantly reduce the duration of the lamps functioning.

Another preventive measure is clearing the projectors filters. The dirty filters are blocking the air flow and cause the overheating of the lamp reducing the functioning period. In case of a replacement using the warranty certificate, the producer will test the lamp to see if the damage has occurred due to the overheating from filter clogging. If the test proves that that was the case the warranty is annulled. That is why it is very important to let the airflow around the projector as free as possible.

If you wish to introduce a new bulb in the existing lighting module of the lamp, make sure that the terminals are very tightly closed because the ceramic block can crack and that may cause ruptures that are reducing considerably the electronic isolation of the lamp.

On the other hand if the terminals are loose the risk of an electric arc to be produced is very high and this will cause the malfunction of the lamps source of power or even of the lamp itself.

Always use the remote control when stopping the projector. If you unplug the device without stopping it first the projector will invariably enter the cooling mode when the image is stopped and the fan will accelerate the cooling of the lamp in a controlled mode. The temperature of the lamp during operating mode is 1,000 C. Unplugging the lamp without letting it first passing through the off mode will cause the unequal cooling of the lamps glass which can cause the cracking of the glass and the premature malfunction of the lamp.

About the Author:

Special thanks to http://www.projector-lamp.org

US Auctions Australian Auctions Austrian Auctions Belgian Auctions Canadian Auctions French Auctions German Auctions Hong Kong Auctions Indian Auctions Irish Auctions Italian Auctions Dutch Auctions Polish Auctions Singapore Auctions Spanish Auctions Swiss Auctions UK Auctions

Best Match Time: ending soonest Time: newly listed Price: lowest first Price: highest first Price + Shipping: lowest first Price + Shipping: highest first

Protechnik PT 625 Wireless Home Theater Surround Sound    US $900.00

PROTECHNIK PT 100A LCD PROJECTOR WITH 72 SCREEN    US $550.00

Protechnik PT 535 Home Theater Surround Sound    US $700.00

PROTECHNIK PT 580 HOME THEATER SYSTEM    US $400.00

Protechnik PT 310A Home Theatre Surround Sound Receiver    US $150.00

Protechnik PT 325 Home Theatre Surround Speaker System    US $99.99

View Page:   1